turn indicator

同根派生

With wrench, turn indicator to open position on indicator plate. Do not force past this point.
用扳手将指示器旋转到指示器板上的开位置。不要用力超过这个点。
Carefully remove the handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.
小心拆卸手轮，并旋转指示器套筒总成，将阀门保留在它的平衡设置点上。
Reinstall turn indicator assembly. Scale retaining ring should be hand-tight Do not overtighten.
重新安装旋转指示器总成。刻度固定环应该用手紧固。不要过紧。
Loosen scale retaining ring and remove turn indicator assembly. It is not necessary to change the memory set point.
松开刻度固定环，拆卸旋转指示器总成。不需要改变记忆设置点。
Remove handwheel and turn indicator sleeve by grasping the handwheel and pulling away from the valve body along the stem.
拆卸手轮，并通过抓住手轮旋转指示器套筒，将其沿着阀杆从阀体内拉出。