Toolpaths

基本解释

In addition, the tool can be stepped back and forth along the toolpath.
而且刀具还可以沿着刀具路径一步步的向前或向后仿真。）
Then research how to set parameter under the CAM module of UG NX2 to generate toolpath and cutter source file of the shaft part.
并且研究了如何在UG NX2的CAM模块下进行设置,生成轴类零件的加工轨迹和刀位源文件。
DUCTpost prior to DP1335 will not support circular G2/G3 arc leads output for angular toolpaths offset in the XY, YZ or ZX planes greater than 0.1 degrees.
在1335以前的旧版本如果刀路延XY;YZ和ZX平面偏置角度大于0.;1度的情况下是不可以输出圆弧连接的。
The purposes of part machining modeling in automatic programming is to provide the geomet ry basis for toolpath generation.
自动编程中零件加工造型的目的,是为了给刀具轨迹提供几何依据;
Abstract: When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
文摘:在生成nc铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。