coolant

音标发音

So, initially as you looked at it it was associated with insufficient coolant.
所以，最初你们观察它时，它是与,不足的冷却剂有关。
You see you have injections points of coolant into the cold and/or the hot legs.
你们看到这些冷却剂注入的点,注入到冷柱以及热柱，或者之一。
So you have to, under this rule, postulate several loss of coolant accidents of different sizes and locations.
所以，你们必须，在这些规定下，假定不同大小和地点的,冷却剂损失的事故。

The reactor also lacks a back-up mechanism to stop it overheating and exploding should the helium coolant escape.
ECONOMIST: Prospects for a new type of nuclear reactor look mixed

a specially prepared liquid that is used to stop a machine from getting too hot while it is operating

Coolant is a liquid used to keep a machine or engine cool while it is operating.

冷却剂
Especially for thorium fuel lattice, such design has negative coolant void reactivitythat decreases with burnup.
特别是对于钍铀燃料栅元,这种选择能够使冷却剂空泡反应性降到负值,并且在燃耗期间不断降低。
冷却液
The influence of the main coolant performance parameter, that is, temperature, pH, the concentration of corrosive ion and different chemical agents, were studied. The results showed that the temperature of the coolant had a great impact on the cavitation.
以铸铁试件为研究对象,借助于磁致伸缩模拟试验装置,研究了冷却液的性能参数对穴蚀的影响,包括温度、pH值、腐蚀性离子的浓度以及不同化学试剂等影响因素,深入研究了典型化学试剂抑制穴蚀性能的效果。
磨削液
Secondly, the experiments of material removal rate of three typical material were finished, and the relationships of material removal rate, belt wear and grinding parameters, species of abrasive, contact wheel and grinding coolant were studied.
2)在一定理论磨削深度的条件下,粗磨加工影响材料切除率的参数中,首先影响最显著的是磨料种类,其次是砂带线速度、磨削时间和磨削液种类,最后是接触轮齿槽比和工件转速。
冷却介质

冷却介质
In this paper, a study on two-phase flow and heat exchange inside pipe was made in theory, and the source program used in calculation of temperature distribution of coolant and wall along hollow wire was modified.
本文对管内两相流动及传热进行了理论分析，修改和完善了空心导线冷却介质及壁面温度分布的源程序。
冷却剂